TM 5-3805-255-14
0102
ASSEMBLY CONTINUED
8. Install new O-ring (Figure 28, Item 2) in housing bore and apply a light coat of heavy grease (WP 0021) to bore
and O-ring.
9. Install new O-ring (Figure 28, Item 1) in groove in input pump cover (Figure 28, Item 4).
NOTE
Care must be taken during pump installation to avoid cutting O-rings.
10. Install pump (Figure 28, Item 4) into bore of housing (Figure 28, Item 3). Install two capscrews (Figure 28,
Item 5) and new lockwashers. Torque capscrews to 26 to 32 lb-ft (35 to 32 Nm).
Figure 28. Pump and O-Rings Installation.
0102
0102-18