TM 5-3805-255-14
0103
ASSEMBLY CONTINUED
7. Install three new seal rings (Figure 39, Item 1) in inlet ports of inner oil supply cover (Figure 39, Item 2). Retain
seal rings in position with a small amount of grease.
8. Coat lips of three seal rings (Figure 39, Items 1, 3, and 4) with grease. Install three seal rings in inner oil supply
cover (Figure 39, Item 2) starting from rear of cover as follows:
a. Lip facing rearward (Figure 39, Item 1).
b. Lip facing forward (Figure 39, Item 3).
c.
Lip facing rearward (Figure 39, Item 4).
Figure 39. Seal Rings Installation.
0103
0103-26
