TM 5-3805-255-14
0111
ASSEMBLY CONTINUED
000111
17. Install shim pack (Figure 23, Item 4) removed during disassembly, between bearing cage (Figure 23, Item 1)
and differential carrier (Figure 23, Item 3).
NOTE
Locate thin shims on outside of pack for best sealing ability.
18. Tap pinion and cage assembly (Figure 23, Item 1) into position with a soft mallet.
19. Install six cage/cover retaining capscrews (Figure 23, Item 2) and tighten to 150 to 175 lb-ft (203 to 237 Nm).
Figure 23. Pinion Assembly Installation.
0111
0111-18