TM 5-3805-255-14
0116
ASSEMBLY CONTINUED
13. Install adjuster screw (Figure 12, Item 2) and shims (Figure 12, Item 3) into slotted end of spur shaft (Figure 12,
Item 1).
Figure 12. Pitman Arm Shaft Installation.
0116
14. Use a feeler gauge and measure clearance between head of screw (Figure 13, Item 2) and spur shaft (Figure
13, Item 1). Clearance must not be more than 0.002 in. (0.0500 mm). If clearance is greater than 0.002 in.
(0.0500 mm), select a thicker shim. Four sizes are available:
HA-1440 Shim - 0.063 in. (1.600 mm)
HA-1441 Shim - 0.065 in. (1.651 mm)
HA-1445 Shim - 0.067 in. (1.702 mm)
HA-1446 Shim - 0.069 in. (1.753 mm)
Figure 13. Clearance Measurement.
0116
0116-10
