TM 5-3805-255-14
0121
ASSEMBLY CONTINUED
19. Lubricate and install pistons (Figure 27, Items 2 and 8) and spacer (Figure 27, Item 3) in bore of detent sleeves
(Figure 27, Items 1 and 9).
CAUTION
Lubricate all parts with clean oil (WP 0018) before installation.
Spacer is used in bucket plunger only.
Take care when installing O-rings to avoid cutting O-ring on plug threads.
Failure to follow these cautions may result in damage to equipment.
20. Lubricate and install new O-rings (Figure 27, Items 4 and 7) in plugs (Figure 27, Items 5 and 6).
21. Install plugs (Figure 27, Items 5 and 6) in bore of detent sleeves (Figure 27, Items 1 and 9) and tighten
securely.
Figure 27. Detent Sleeves Assembly.
0121
22. Remove capscrew (Figure 28, Item 2) and hex nut (Figure 28, Item 3) from plunger eyes (Figure 28, Items 1
and 4).
Figure 28. Plunger Bolt and Nut Removal.
0121
0121-25
