TM 5-3805-258-24-1
3304 DIRECT INJECTION VEHICULAR ENGINE
WITH SCROLL FUEL SYSTEM
SPECIFICATIONS
CYLINDER HEAD
Thickness of cylinder head
Step 3. Again tighten all bolts in number sequence
(new) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10u,O3 t 0.76 mm (3.938 f .030 in.)
(hand torque only)
Put 5P3931 Anti-Seize Compound on threads and tighten bolts in the
to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 ~ 17 N.m (185 A 13 Ib.ft.)
Step sequence that follows:
Step 4. Tighten all bolts in letter sequence
Step 1. Tighten all bolts in number
(hand torque only)
sequence to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 N.m (115 Ib.ft.)
to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 * 7 N.m (32 t 5 Ib.ft.)
Step 2. Again tighten all bolts in number
sequence to . . . . . . . . . . . . . . . . . 250 & 17 Nm (185 t 13 Ib.ft.)
VALVE COVER
Put 5H2471 Cement on the face of valve cover and top side of gasket.
Tighten bolts by number in sequence
shown to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.9 * 2.8 N.m (96 t 24 Ib.in.)
VIEW FROM RIGHT SIDE OF ENGINE
EXHAUST MANIFOLD
Put 5P3931 Anti-Seize Compound on all threads.
(1)
Torque
for
studs
.
.
25
t
4
Nm
(20
f
3
Ib.ft.)
(2) Torque for nuts holding exhaust
manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 * 4 N.m (35 * 3 Ib.ft.)
2-9
