FUEL INJECTION PUMP HOUSING AND GOVERNOR

4. Remove the nut and disconnect cable assembly

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
137

TM 5-3805-258-24-2 ENGINE FUEL INJECTION PUMP REMOVE FUEL INJECTION PUMP HOUSING AND GOVERNOR 1286-11 Tools Needed A 8S2264 Puller Group 1 6V7031 Bolts 2 8M7145 Washer 2 8B7560 Step Plate 1 1. 2. 3. 4. 5. start by: a) remove fuel lines b) remove fuel filter base and filter Remove nuts (2) and cover (1) from the timing gear cover. Loosen bolt (3). Leave a gap of 3.2 mm (.125 in.) between the washer and the gear. Use tool (A) to remove gear (4). For Models 950BNS and 950BS: a) Remove the nut and disconnect cable assembly (5) from the governor control lever. b) Remove the bolts and disconnect bracket assembly (6) from the governor. For Models 950BNSCE and 950BSCE: a) b) c) d) Remove six screws (23), cover (24) and gasket (25). Mark the position of lever (26) on gover- nor shaft. Remove screw (27) and dis- connect cable assembly (28) and washer (29) from lever. Remove lever and two bushings (30). Remove two screws (31). Remove hous- ing (32) and seal (33) from governor. DISASSEMBLY AND ASSEMBLY HOUSING AND GOVERNOR 5-92

Privacy Statement
Press Release
Contact