TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
ENGINE
ELECTRIC STARTING MOTOR
REMOVE ELECTRIC STARTING
MOTOR
1453-11
1. Disconnect the battery cables from the batter-
ies. See REMOVE BATTERIES.
NOTE: For models 950BNSCE and 950BSCE,
remove starter receptacle wires from starter
motor and solenoid.
2.
3.
4.
Put identification on wires ( 1 ) and disconnect
them from the starter.
Put identification on wires (2) and (4) and
disconnect them from the solenoid.
Remove bolts (3) and starter (5). The weight of
the starter is 27 kg (60 lb.).
INSTALL ELECTRIC STARTING
MOTOR
1453-12
1. Put gasket(1) in position and install starter (2)
on the flywheel housing.
2. Connect wires (3) to the solenoid and wires (4)
to the starter.
NOTE: For models 950BNSCE and 950BSCE,
connect starter receptacle wires to starter
motor and solenoid.
3. Connect the battery cables to the batteries. See
INSTALL BATTERIES.
5-12
