Remove two rectifier terminal retaining nuts

ASSEMBLE ALTERNATOR - TM-5-3805-258-24-2_22

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
11

TM 5-3805-258-24-2 ENGINE DISASSEMBLY AND ASSEMBLY ALTERNATOR 23. 24. 25. Remove two rectifier terminal retaining nuts (28) using a 9/16” wrench, two washers (29) and insulator (30) from outside of rear frame assembly. Remove two rectifier terminal retaining nuts (31) using a 3/8” wrench, two lockwashers (32), washer (33) and insulator (34). Remove two rectifier terminal retaining nuts (35) using a 3/8” wrench and washers (36). 26. Remove three screws (37). 27. Remove ring (38) from rear frame. 28. Remove roller bearings (39) and retaining cage (40) with tooling C. CAUTION If bearing is removed in this step, it will be destroyed. 29. Remove bearing outer race (41 ) with tooling B. 5-12c

Privacy Statement
Press Release
Contact