POWER TRAIN
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
TORQUE
19. Install rings (33) on both sides of the stator.
20. Install stator (32) on impeller (22).
21.
22.
23.
Install ring (34) on the shaft as shown.
Install two 3/8”- 16 NC forged eyebolts (35)
and a hoist in the carrier. Put the carrier and
the impeller in position in the housing as shown.
CONVERTER
Install bolts (36) that hold the carrier and the
impeller in the housing. Tighten the bolts to a
torque of 27 ± 2 N•m (20 ± 1 lb. ft.).
5-247
