TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
34.
35.
36.
37.
38.
39.
40.
41.
TORQUE
Install bearing (49) in gear (47).
Put gear (47) into position in the housing as
shown.
Install spacer (50) and bearing (52) on shaft
(51) as shown.
Install shaft (51) in the gear. Make sure shaft
(51) fits into the bore of the housing.
Install bolt (53) in shaft (51). Tighten the bolt
to a torque of 100 ± 5 N•m (75 ± 5 lb. ft.).
Rotate gear when tightening to seat bearing.
Put flange (55) in position on the gear and
install bolts (54). Tighten the bolts to a torque
of 50 ± 3 N•m (37 ± 2 lb. ft.).
Install tooling (C) and a hoist on the housing as
shown.
Put the housing in position on the torque con-
verter and install bolts (56).
-
end by:
a) connection of torque converter to transmis-
sion
CONVERTER
5-250
