TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TRANSMISSION HYDRAULIC CONTROL VALVES
REMOVE TRANSMISSION HYDRAULIC
CONTROL VALVES
3152-11
Tools Needed
A
FT527
Lifting Bracket
1
start by:
a) remove seat (see OPERATOR’S STA-
TION DISASSEMBLY AND ASSEM-
BLY section)
1.
2.
3.
Remove the covers and windshield washer bot-
tle from under the operator’s seat.
Disconnect the transmission neutralizer from
the hydraulic control valve. See REMOVE
TRANSMISSION NEUTRALIZER in the
VEHICLE SYSTEMS DISASSEMBLY
AND ASSEMBLY section.
Remove the bolts and disconnect opening (slot)
on the speed selector from the notch on the
selector spool.
NOTE: The torque converter transmission and
transfer gears are removed for a better photo illustra-
tion.
4.
5.
6.
7.
Remove cover assembly
from the transmission case
Remove bolt (3) and the
(1) and the gasket
washer. Push sleeves
(2) and (4) into the torque converter to discon-
nect them from the valve body.
Remove adapter (5) and the spring from the
transmission case.
Install a ½”- 13 NC forged eyebolt (6) in the
sleeve as shown. Remove the sleeve from the
transmission case.
5-251
