TM 5-3805-258-24-2
POWER TRAIN
TRANSMISSION
98.
99.
100.
101.
102.
103.
Install ½”-13 NC 10” long guide bolts (120) in
the housing as shown.
Install No. 6 clutch housing (115) on the hous-
ing as shown.
Install bolts (121) that hold the No. 6 clutch
housing to the housing. Tighten the bolts to a
torque of 110 ± 10 N•m (80 ± 7 lb. ft.).
Install bearings (124) in gears (123).
Install washers (122), gears (123) and washers
(125) in the carrier.
Install shafts (126) in carrier (128) to hold the
washers, gears and bearings in place.
104. Use a hammer and a punch to install pins (127)
into the carrier and shafts.
NOTE: If pins (127) are damaged, a replacement
will be necessary.
DISASSEMBLY AND ASSEMBLY
5-296
