Step 4. - TM-5-3805-262-20

8. ENGINE CRANKS BUT DOES NOT START WHEN COLD START AID IS ACTIVATED

TM-5-3805-262-20 Loader Scoop Type DED 4x4 Articulated Frame Steer 2-1/2 Cubic Yard (J.I. Case Model MW24C) Manual
Page Navigation
89

TM 5-3805-262-20 3-4. ENGINE TROUBLESHOOTING (CONT) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 7. EXCESSIVE OIL CONSUMPTION (Cont). S t e p 3 . ( C o n t ). a. If oil leaks are seen, tighten hardware. If tightening hardware does not stop oil leakage, notify next higher maintenance level to replace leaking gaskets. b. If oil leaks are not seen, go to step 4 below. Step 4. Turn engine oil dipstick handle clockwise several turns then pull up to remove. Check if proper weight oil is used (see a. If engine oil is not proper weight, o i l f i l t e r , a n d f i l l c r a n k c a s e w i th 4-2) . L0 5-3805-262-12). drain engine oil, replace proper weight oil (page b. If engine oil is proper weight, reinstall engine side panels (page 9-17) and go to step 5 below. Step 5. Unlock radiator cap access p a n e l. Remove radiator cap and inspect coolant for lubricating oil con - t a m i n a t i o n . a. If coolant is contaminated with oil, notify next higher maintenance level to check oil cooler core for damage. b. If coolant is not contami- nated, notify next higher maintenance level (addition- al tests must be performed to locate problem). 3-34

Privacy Statement
Press Release
Contact