TM 5-3805-262-20
3-34. BATTERY SYSTEM TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. BATTERIES DISCHARGED OR DO NOT MAINTAIN CHARGE (Cont).
Step 11. (Cont).
remove wire between starter sole-
b. If VTM displays over 0.2 volt,
noid G terminal and starter ground terminal (page 5-16). Clean
starter motor negative terminal, solenoid G terminal, and wire
terminals. Reinstall wire and repeat above test. If VTM still
displays over 0.2 volt , replace wire and repeat step 1 above.
Step 12. Check cable connections at battery posts.
a. If connections are loose, tighten and repeat step 1 above.
b. If battery cable connections are okay, clean connections and re-
peat step 1 above.
3-294
