TM 5-3805-262-20
DISASSEMBLY
(1)
( 2 )
( 3)
(4)
(5)
(6)
(7)
(8)
(9)
Remove two circuit breakers (26) from right-hand instrument panel by un-
screwing mounting nuts and removing from rear.
Tag and disconnect terminal (27) and eyelet terminal (28) and remove cir-
c u i t b r e a k e r ( 2 9 ).
Tag and disconnect two terminals (30) and remove circuit breaker (31).
Remove four screws (32) and vehicle lights switch (33) after removing ve-
hicle lights switch (33) knobs to allow vehicle lights switch to clear
right-hand instrument panel.
Remove boot (34), lock washer (35), and FLOOD LIGHTS switch (36).
Tag and disconnect resistor (37) from ignition switch (39).
Compress HYDRAULIC FILTER warning light (38) spring from rear of right-
hand instrument panel, rotate HYDRAULIC FILTER warning light (38) until
tab clears notch in right-hand instrument panel, then pull from front .
Remove nut (40), lock washer (41), and ignition switch (39).
Remove two screws (42), lock washers (43), and DIMMER COMPT LIGHTS switch
(44).
(10) Remove screw (45), nut (46), lock washer (47), washer (48), and resistor
(49).
(11) Remove round nut (50) and COLD START switch (51).
(12) Remove nut (52) and two screws (53) from COLD START switch (51).
(13) Remove screw (54), washers (55), air pressure warning alarm (56), and
lock washer (57).
(14) Remove two plugs (5$) from right-hand instrument panel.
5-53
