TM 5-3805-262-20
INSTALLATION
(1)
(2)
(3)
( 4 )
( 5)
(6)
(7)
At engine water manifold, install bushing
(6) and tighten.
Install water temperature sending unit (5) in bushing (6) and tighten.
Connect terminal (4) to water temperature sending unit (5) and secure
using washer (3), lock washer (2), and nut (l).
Spray terminal (4) with electrical cleaner and allow to air dry. Then
s p r a y t e r m i n a l w i t h e l e c t r i c a l s e a l e r.
Fill radiator with coolant (page 4-71).
Start and operate engine at idle speed and check for coolant leakage at
water temperature sending unit (5). If leakage is seen at bushing (6),
tighten bushing and water temperature sending unit (5). If leakage is
from water temperature sending unit, replace sending unit.
Install engine top hood (page 9-13).
5-123
