TM 5-3805-262-34
4-3. TRANSMISSION MAINTENANCE (CONT)
a. Transmission Torque Converter Group (Cont) .
DISASSEMBLY (SHEET 3 OF 3)
(9) Install converter pump (29) and assembled parts (22 thru 28) in a soft
jawed vise with drive gear in jaws of vise. Remove 10 capscrews (22), six
lock plates (23) , and retaining plate (24).
(10) Using soft hammer, hit rear of converter pump (29) to remove it from
bearing (26).
(11) Put charging pump drive gear (25) on wood blocks. Using hammer and punch,
remove bearing (26).
(12) Using a putty knife or scraper, remove and discard seal (27) from drive
gear (25).
(13) If necessary, press capscrews (28) from converter pump (29) flange and
discard.
4-100
