TM 5-3805-262-34
3-2. FUEL SYSTEM MAINTENANCE (CONT)
e. Fuel Injection Governor.
This task covers removal, disassembly, cleaning,
inspection, repair, reassembly, and installation of fuel injection governor.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Screwdriver
Retaining ring pliers
Torque wrench, 1/2 inch drive
Vise jaw caps
Vise
Key set, socket head screw
Automotive Mechanic’s Tool Kit
Socket wrench set, 1/2 inch drive
Automotive Fuel and Electrical System Repair Tool Kit
Plastic hammer
Machinist’s steel rule
Drive pin punch set
Thickness gage
Needle nose pliers
Putty knife
No. 2 Common Organizational Maintenance Tool Kit
Torque wrench, 3/8 inch drive, 200 lb-in. capacity
Container, 2 quarts capacity
Spring gage
Depth gage
Arbor press
Assembly sleeves, two, fabricated (page 3-179)
Vise, swiveling (FSCM 53867 PN KDEP 2919)
Mounting flange (FSCM 53867 PN 1-685-720-017)
U-bracket (FSCM 53867 PN KDEP 2963)
Open end wrench (FSCM 53867 PN KDEP 2922)
BOX end wrench (FSCM 53867 PN EFNY 108)
Torque capsule wrench (FSCM 53867 PN KDEP 2968)
Flyweight pin wrench (FSCM 53867 PN KDEP 2998)
Flyweight extractor (FSCM 53867 PN KDEP 2886)
Wire
MATERIALS/PART8: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Calibrating fluid (SAE J967)
Grease (FSCM 53867 PN Ft 1 v 8)
Sealing compound (FSCM 53867 PN Kk 68 v 1)
Governor kit (FSCM 53867 PN DGK201)
NOTE
PRELIMINARY PROCEDURE: Fuel injection pump removed and mounted in
swiveling vise using mounting flange and U-bracket (page 3-140).
3-167
