TM 5-3805-262-34
REASSEMBLY (SHEET 3 OF 3)
(28)
(29)
(30)
(31)
(32)
(33)
(34)
(35)
(36)
(37)
(38)
Press guide sleeve assembly (41 thru 44) onto guide lever (48) knuckle
using arbor press.
Connect rack link (49) to fulcrum lever (47) and install one retaining
ring (46).
Connect fulcrum lever (47) to guide lever (48) and install retaining ring
(46) .
Position guide sleeve assembly (41
thru 44) with levers (47 and 48) in
governor cover under swivel lever
(73).
Install slide stop (40) and fit
fulcrum lever pin into slide stop.
Hook one end of spring (51) on
tensioning lever (50).
Hook free end of spring (51) on
swivel lever (73).
Guide threaded end of tensioning
lever (50) under swivel lever (73).
Be sure tensioning lever is behind
full load stop screw (75).
Install shaft (37) through governor
cover (77) bore, tensioning lever
(50), and guide lever (48). Check
levers (48 and 50) for ease of
movement. If necessary, disassemble
and replace
obtain free
Install two
Install pin
defective-parts to
movement.
shaft plugs (36).
(39) and swivel head (38).
3-183
