TM 5-3805-262-34
INSTALLATION (SHEET 4 OF 5)
LEGEND
1. Nuts (2)
2. Lock washers (2)
3. clamps (2)
4. Capscrews (2)
5. clamps (2)
6. Spacers (2)
7. Nuts (2)
8. Lock washers (2)
9. clamps (2)
10. Spacers (2)
11. clamps (2)
12. Capscrews (2)
(32)
(33)
(34)
(35)
position clamp (11) on hydraulic hose. Install
(10), and clamp (9). Secure using lock washer (8)
harness between clamps (9 and 11). Put clamp (5)
Above hydraulic pump,
capscrew (12), spacer
and nut (7).
Position front wiring
with auxiliary steering wiring harness in clamp on capscrew (4). Install
capscrew through clamp (11) and install spacer (6). Put capscrew (4)
through hole in clamp (9) and install clamp (3) with blackout lights
wiring harness on capscrew.
Install and tighten lock washer (2) and nut
(1).
Repeat steps (32) and (33) above to install remaining clamps (9 and 11)
and secure front wiring harness to hydraulic hose.
Install tie straps in locations noted during removal and as necessary to
secure blackout lights wiring harness and auxiliary steering wiring har-
ness to front wiring harness.
3-265
