TM 5-3805-262-34
3-6. WIRING HARNESSES MAINTENANCE (CONT)
a. Front Wiring Harness (Cont).
INSTALLATION (SHEET 5 OF 5)
(36) Spray all exposed terminals with electrical sealer.
(37) Install new grommet in floor plate where front wiring harness passes
through floor plate.
(38) Tell assistant to check all front wiring harness connections using table
on page 3-258 and wiring diagram in TM 5-3805-262-20.
(39) Connect battery ground cable (refer to TM 5-3805-262-20).
(40) Turn ignition key switch to on position. Test front wiring harness (refer
to TM 5-3805-262-20).
3-266
