TM 5-3805-262-34
REMOVAL ( SHEET 2 OF 3)
(2)
Remove four screws and carefully
(3)
(4)
pull cab switch panel up from
heater console just enough to
gain access to cab lower wiring
harness wire terminals on back
of cab switch panel.
At 3 ampere circuit breaker just
below FRONT WIPER switch, dis-
connect cab lower wiring harness
red-white wire spade terminal
from circuit breaker terminal.
Do this by grasping spade ter-
minal with finger and firmly
pulling from circuit breaker
terminal.
At 3 ampere circuit breaker just
below HEATER FAN switch, dis-
connect cab lower wiring harness
red-white wire spade terminal
from circuit breaker terminal.
Do this by grasping spade ter-
minal with finger and firmly
pulling from circuit breaker
terminal.
3-305
