TM 5-3805-262-34
3-6. WIRING HARNESSES MAINTENANCE (CONT)
e. Cab Lower Wiring Harness (Cont).
REMOVAL (SHEET 3 OF 3)
(5)
(6)
(7)
(8)
At 6 ampere circuit breaker
just below DEFROSTER switch,
disconnect cab lower wiring
harness red-white wire spade
terminal from circuit breaker
terminal. Do this by grasping
spade terminal with finger and
firmly pulling from circuit
breaker terminal.
Locate cab lower wiring harness
blue, yellow-black, and white-
blue wires terminals. Discon-
nect these wire terminals from
associated cab console wiring
harness wire terminals. Do this
by grasping terminals with fin-
gers and firmly pulling apart.
Beneath cab deck, disconnect
front wiring harness connector
from cab lower wiring harness
connector. Do this by grasping
connectors and firmly pulling
apart.
Cut, remove, and discard
three tie straps.
NOTE
cut , remove, and discard
tie straps at heater
console as encountered
d u r i ng
removal.
Note
locations to aid in-
stallation.
(9) Pull cab lower wiring
harness down through
hole while assistant
guides wires through
hole. Discard cab
lower wiring harness.
3-306
