TM 5-3805-262-34
REASSEMBLY
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Lubricate all rubber parts using clean brake fluid.
If removed, install four plugs (10) in body (11).
Install two bleeder valves (9).
Install four new O-rings (5) and new piston rings (6) in body (11) bores.
Piston rings must be toward inside of caliper body.
Install four new wipers (8).
Lubricate four pistons (7) with clean brake fluid and install pistons in
body bores. If necessary, push pistons into bores with handle of hammer.
Install two new O-rings (4) on piston caps (3).
Install and tighten two piston caps (3) using open end wrench.
Install new O-ring (2) on piston plugs (1).
(10) Install and tighten two piston plugs (1).
LEGEND
1. Piston plugs (2)
2. O-rings (2)
3. Piston caps (2)
4. O-rings (2)
5. O-rings (4)
6. Piston rings (4)
7. Pistons (4)
8. Wipers (4)
9. Bleeder valves (2)
10. Plugs (4)
11. Body
3-429
