TM 5-3805-262-34
DISASSEMBLY OF HYDRAULIC BRAKE CYLINDER (SHEET
(4)
Using your fingers, hold
bearing (4) in place and
remove retaining ring (3)
using snap ring pliers.
(5) Remove bearing (4) from
housing (19).
2 OF 2)
(6) Remove piston (6) , cup (5), and spring (7).
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
LEGEND
1. Guide
2. Boot
3. Retaining ring
4. Bearing
5. cup
6. Piston
7. Spring
8. Plug
9. O-ring
10. Spring
11. Retainer
12. cup
13. Piston
14. Seat
15. Seal
16. Bleeder screw
17. Plug
18. Gasket
19. Housing
Remove cup (5) from piston (6). Discard cup (5).
Loosen but don’t remove plug (8).
Hold plug (8) against spring (10) tension and remove plug.
Remove and discard O-ring (9) from plug (8).
Remove spring (10).
Put a rod through opposite end of housing (19) and push retainer (11),
cup (12), and piston (13) from housing. Discard cup (12).
Using a screwdriver loosen and remove seat (14) and seal (15) from piston
(13). Discard seat and seal.
Remove bleeder screw (16) from housing (19).
Remove plug (17) and gasket (18) from housing (19). Discard gasket (18).
3-431
