TM 5-3805-262-34
DISASSEMBLY (SHEET 4 OF 4)
LEGEND
1. Tube
2. Fittings (2)
3. Capscrews (2)
4. Unloader
5. Retainers (2)
6. Seals (2)
7. Disks (2)
8. Diaphragms (2)
9. Springs (2)
10. Plungers (2)
11. Springs (2)
12. Capscrew
13. Capscrews (5)
14. Cylinder head
15. stops (2)
16. Exhaust valves (2)
17. Springs (2)
18. Seats (2)
19. Washers (2)
20. Valve guards (2)
21. Inlet valves (2)
22. Plug
23. Capscrews (2)
24. Lock washers (2)
25. Outlet port
26. Gasket
27. Gasket
(r) Remove two valve guards (20) and inlet valves (21) from cylinder head
(14). Discard inlet valves.
NOTE
DO not perform following step unless inspection indicates need for
replacement of plug (22).
(s) Remove
(t) Remove
gasket
(u) Remove
plug (22) from cylinder head (14).
two capscrews (23), two lock washers (24), outlet port (25), and
(26). Discard gasket (26).
and discard gasket (27). If necessary, use putty knife to remove
gasket.
(v) Remove cylinder head (14) from vise.
3-469
