TM 5-3805-262-343-15. AUXILIARY STEERING PUMP AND MOTOR MAINTENANCE (CONT)c. Auxiliary Steering Pump (Cont) .DISASSEMBLY(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)Put front cover (15) insoft jawed vise with rearcover (3) upwards.Using punch and hammer, putmatch marks on rear cover(3), center body (5), andfront cover (15).Remove four capscrews (1)and washers (2).Remove rear cover (3) and O-ring (4). Discard O-ring.Remove center body (5).Remove two dowel pins (6) from front cover (15).Remove drive gear (7) and driven gear (8).Remove and discard wear plate (9), heat shield (10), gasket (11), andseal (12) from front cover (15).Remove and discard O-ring (13) from front cover (15).Pull seal (14) from front cover (15) using suitable tool. Discard seal.LEGEND1. Capscrews (4)2. Washers (4)3. Rear cover4. O-ring5. Center body6. Dowel pins (2)7. Drive gear8. Driven gear9. Wear plate10. Heat shield11. Gasket12. Seal13. O-ring14. Seal15. Front cover3-536
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business