TM 5-3805-262-34
3-18. FRONT CHASSIS MAINTENANCE (CONT)
b. Access Steps. This task covers removal and installation of access steps.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Socket wrench set, 3/8 inch drive
Combination box and open end wrench set
REMOVAL
(1)
(2)
(3)
LEGEND
Support access step (4) and remove two capscrews (l), nuts (2), and lock
washers (3).
Remove access step (4).
Repeat steps (1) and (2) above to remove five remaining access steps (4).
1. Capscrews (2)
2. Nuts (2)
3. Lock washers (2)
4. Access step
(1) Position access step (4) on front chassis.
(2)
Install and tighten two capscrews (1), lock washers (3), and nuts (2).
Tighten nuts securely.
(3) Repeat steps (1) and (2) above to install five remaining access steps
(4).
3-578
