TM 5-3805-262-34
3-18. FRONT CHASSIS MAINTENANCE (CONT)
c. Frame Stops.
This task covers removal and installation of frame stops.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Socket wrench set, 3/8 inch drive
REMOVAL
(1) Remove two nuts (1), lock washers (2), and washers (3).
(2) Remove frame stop (4) from front chassis.
(3) Repeat steps (1) and (2) above to remove frame stop (4) from opposite
side of front chassis.
LEGEND
1. Nuts (4)
2. Lock washers (4)
3. Washers (4)
4. Frame stop (2)
INSTALLATION
(1) Put frame stop (4) studs through associated holes in front chassis.
(2)
Install two washers (3), lock washers (2), and nuts (1) on frame stop (4)
studs. Tighten nuts securely.
(3) Repeat steps (1) and (2) above to install frame stop (4) on opposite side
of front chassis.
3-579
