TM 5-3805-262-343-18. FRONT CHASSIS MAINTENANCEa. AccessDoor. This task coversstallation of front access door.removal, cleaning, inspection, repair, and in-TOOLS: No. 1 Common Organizational Maintenance Tool KitSafety glassesSocket wrench set, 3/8 inch driveScratch wire brushCombination box and open end wrench setMATERIALS/PARTS: Clean cloths (Appendix C, item 1)Cleaning solvent P-D-680 (Appendix C, item 2)Abrasive cloth (Appendix C, item 8)Paint (Appendix C, item 22)PERSONNEL REQUIRED: Two Construction Equipment Mechanics MOS 62BREMOVAL(1)(2)(3)(4)(5)(6)Turn handle (6)left.If necessary to(2). Remove tab(5).counterclockwise and pull access door (12) up and to theremove handle (6), unscrew and remove latch (1) and nutwasher (3). Remove handle (6), ring (4), and lock ringRemove three capscrews (7), nuts(8), lock washers (9), and washers (10and 11) while supporting access door (12).With an assistant, remove access door (12) with stop (17) attached fromfront of loader.Remove two capscrews (13), nuts (14), lock washers (15), and washers (16)while supporting stop (17). Remove stop (17) from access door (12).Remove three capscrews (18), nuts (19), lock washers (20), and washers(21 and 22). Put axle breather hose with two clamps on hydraulic reser-voir. Remove hinge (23) from chassis.3-574
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business