TM 5-3805-262-34
3-19. BODY AND CAB MAINTENANCE
a. Noise Reduction Pads.
This task covers removal, cleaning, inspection, and in-
stallation of noise reduction pads.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Hand hammer, 16 ounces
Screwdriver
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Adhesive (Appendix C, item 36)
REFERENCE: TM 5-3805-262-20
NOTE
PRELIMINARY PROCEDURE:
Operator’s seat removed (refer to TM
5-3805-262-20).
REMOVAL
(1) Remove foam pads (1 thru 9) from cab: carefully peel foam pads from
mounting surfaces.
(2) Remove plugs securing headliners (10 thru 12) to cab ceiling: pry plugs
out using screwdriver.
(3) Remove headliners (10 thru 12): carefully peel headliners from cab ceil-
ing.
LEGEND
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Cowl foam pads (2)
Windshield foam pad
Side panel foam pads (2)
Lower rear foam pads (2)
Center foam pad
Center foam pads (2)
Rear foam pads (2)
Rear side foam pads (2)
Top foam pads (2)
Rear headliner
Front headliners (2)
Headliner
3-580
