TM 5-3805-262-34
3-19. BODY AND CAB MAINTENANCE (CONT)
c. Door Assemblies (Cont).
(1) Clean seals (13, 18, and 19) and upper door (4) window using detergent
and water solution. Dry using clean cloths.
(2) Clean foam pad (32) using clean water. Steam clean if oily or greasy.
Dry cleaning solvent P-D-680 used to clean parts is toxic and flammable.
Wear protective goggles and gloves and use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and don’t breathe
vapors. Do not use near open flame or excessive heat and don’t smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush
with large amounts of water. If contact with eyes is made, wash eyes
with water and get medical aid immediately.
(3) Clean all metal parts using cleaning solvent P-D-680. Remove all foam
material from lower door (12). Dry using clean cloths.
3-594
