TM 5-3805-262-34
3-22. CONTROL VALVE ASSEMBLY MAINTENANCE (CONT)
a. Control Valve Assembly
(Cont ) .
REMOVAL (SHEET 5 OF 6)
(22) Loosen and disconnect outlet tube (25)
LEGEND
fitting from fitting installed in control
valve assembly.
25. Outlet tube
26. Nuts (3) -
(23) While an assistant holds capscrews (29)
27. Lock washers (3)
using socket wrench, loosen but don’t
28. Washers (3)
remove three nuts (26).
29. Capscrews (3)
(24) Remove two nuts (26) and lock washers (27)
from two capscrews (29) located towards
rear of control valve assembly.
(25) Hold control valve assembly in place and
tell assistant to remove two capscrews (29)
and washers (28).
(26)
Lower rear of control valve assembly
chassis. Hold control valve assembly
position and remove remaining nut (2
lock washer
(27). Disconnect ground
lead (30) from capscrew (29).
LEGEND
26. Nuts (3)
27. Lock washers (3)
28.
29.
30.
31.
assembly
Washers (3)
Capscrews (3)
Ground lead
Control valve
3-652
