TM 5-3805-262-34
3-23. CONTROL LEVERS AND LINKAGES MAINTENANCE (CONT)
CLEANING
a.
Clean seals (37), seal (39), and three knobs (20), using clean cloth moist-
ened with detergent and water solution. Dry using clean cloths.
Dry cleaning solvent P-D-680 used to clean parts is toxic and flammable.
Wear protective goggles and gloves and use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and don’t breathe
vapors. Do not use near open flame or excessive heat and don’t smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin
with large amounts of water. If contact with
with water and get medical aid immediately.
b.
Clean remaining parts using cleaning solvent
cloths.
or clothes is made, flush
eyes is made, wash eyes
P-D-680. Dry using clean
3-712
