2
TM 5-3805-290-10
RETURN TO CARRY ADJUSTMENT
THIS WORK PACKAGE COVERS
Adjustment
INITIAL SETUP
Tools and Special Tools
Equipment Conditions
Machine parked on level ground (WP 0005 00)
Parking brake engaged (WP 0005 00)
Personnel Required
MOS 21E, Heavy Construction Equipment Opera-
Battery disconnect switch in ON position (WP 0004
tor
WAR N I N G
BE ALERT for personnel in the area while performing adjustment. Always check to ensure area is clear of
personnel and obstructions. Failure to follow this warning may result in injury or death to personnel or
damage to equipment.
ADJUSTMENT
1.
Start engine (WP 0005 00).
2.
Fully raise loader arm (WP 0004 00). Lower loader arm until it has reached desired height for return to carry kickout.
3.
Return loader joystick control to HOLD position.
4.
Observe position of return to carry switch assembly to determine how much and which direction the switch has to be
moved to align it with the magnet.
5.
Lower loader arm to ground (WP 0004 00).
6.
Shut down engine (WP 0005 00).
WARN I N G
DO NOT perform adjustment with loader arm raised. Failure to follow this warning may cause injury or
death to personnel or damage to equipment.