TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
1406 06
427-B1885
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear these diagnostic codes when original diagnostic code has
been corrected. Ensure diagnostic code CID 1406 FMI 06 is active before per-
forming this procedure.
1. Check clutch 6 (first speed) solenoid.
1. If CID 1406 FMI 06 changes to CID
(a) Turn battery disconnect switch and
1406 FMI 05 when clutch 6 (first
engine start switch to ON position (TM
speed) solenoid is disconnected, clutch
5-3805-290-10). Do not start engine.
6 (first speed) solenoid has failed.
(b) Connect MSD (WP 0006 00) and
Repeat this test to verify clutch 6 (first
observe status of diagnostic code.
speed) solenoid failure. Replace
(c) Disconnect clutch 6 (first speed)
modulating valve (WP 0177 00).
solenoid with active diagnostic code
2. If CID 1406 FMI 06 remains active, go
from wiring harness.
to Test 2.