TM 5-3805-290-23-1
BRAKE SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0015 00
SERVICE BRAKE DISCS WEAR CHECK
0015 00
WARN I N G
Ensure steering frame lock is connected. DO NOT operate machine with steering frame lock connected.
Failure to follow this warning may result in injury or death to personnel.
N OT E
There are two inspection plugs at front of each axle.
The procedure to check front brake discs for wear is identical for rear brake discs.
Mirror, light, and brake wear gage (for single disc brakes) are required.
427-B0947
427-B0946
1.
Connect steering frame lock (TM 5-3805-290-10).
2.
Start engine to build accumulator pressure.
3.
Stop engine (TM 5-3805-290-10). Engage parking brake. Remove inspection plug for brake disc(s) being checked.
