4
TM 5-3805-290-23-2
WATER PUMP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Tag, marker (Item 54, WP 0206 00)
Unit
Gasket
Tools and Special Tools
Personnel Required
Tool kit, general mechanic's (Item 96, WP 0205 00)
MOS 62B, Construction Equipment Repairer
Shop equipment, common no. 1 (Item 77, WP 0205
References
TM 5-3805-290-10
Wrench, torque (Item 102, WP 0205 00)
Equipment Conditions
Cooling system drained (WP 0042 00)
Materials/Parts
Cleaning compound, solvent, type III (Item 9, WP
Drawings Required
TM 5-3805-290-23P, Figure 36
Gasket cement (Item 20, WP 0206 00)
Estimated Time to Complete Task
Rag, wiping (Item 41, WP 0206 00)
3.0 hr
WARN I N G
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized cooling sys-
tem and escaping steam or hot coolant may result in serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen cap to
first stop and let any pressure out of cooling system, then remove cap. Failure to follow this warning may
result in serious burns.
Wear effective eye, hand, and skin protection when handling coolants. Failure to do so may result in injury to
personnel.
N OT E
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local policy and
ordinances. Ensure all spills are cleaned up.
Additional components are removed for illustration purposes.
