TM 5-3805-290-23-2
BRAKE PEDALS AND STOPLAMP SWITCH REPLACEMENT - CONTINUED
0094 00
BRAKE PEDALS INSTALLATION - CONTINUED
4.
Install two new bearings (7) and RH brake pedal (4) on LH brake pedal and shaft assembly (9).
5.
Tighten retaining bolt (6).
6.
Connect RH brake pedal (4) to linkage rod (5).
7.
Install washer (3), retaining pin (2), and new cotter pin
(1) on RH brake pedal (4) and linkage rod (5).
427-B1111
8.
Operate brakes and make any necessary adjustments.
9.
Install steering column (WP 0099 00).
10.
Verify correct operation of brake and steering systems (TM 5-3805-290-10).
BRAKE PEDALS ADJUSTMENT
Adjusting Pedal Height
1.
Adjust pedal stop (12) in order to set pedal height (A).
2.
Set pedal height (A) to 5.3 in. (13.5 cm) from floor.
427-B0033
0094 00-3
