TM 5-3805-290-23-2
SERVICE BRAKE CONTROL VALVE REPLACEMENT - CONTINUED
0093 00
INSTALLATION - CONTINUED
WARN I N G
After replacing hydraulic component, make sure all personnel stand clear of machine during start up. If
hydraulic fluid escapes under pressure, it can penetrate the skin, causing injury to personnel.
4.
Run engine and actuate brake pedal several times to purge air from system (TM 5-3805-290-10).
5.
Check brake operation (TM 5-3805-290-10).
6.
Check hydraulic tank oil level (TM 5-3805-290-10).
WAR N I N G
Before operating equipment, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
7.
Secure steering frame lock in stowed position (TM 5-3805-290-10).
END OF WORK PACKAGE
0093 00-4
