TM 5-3805-290-23-2
GEAR PUMP BRAKING AND HYDRAULIC FAN REPLACEMENT - CONTINUED
0186 00
INSTALLATION
N OT E
Use a container to catch any fluid that
may drain from hoses or system. Dis-
pose of fluid IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
1.
Install brake charging pressure sensor (WP 0071 00)
on pump (2).
2.
Install pump (2) in vice and use a mallet to install gear
(19) on pump and secure with washer (18) and nut
(17). Tighten nut to 52 4 lb-ft (70 5 Nm).
3.
Install new gasket (16) on pump (2).
427-B0734
4.
Position gear pump (2) on machine and install five
washers (15), bolts (14), washer (13), and bolt (12).
Tighten bolts to 11 2 lb-ft (15 3 Nm).
427-B0733
0186 00-4
