TM 5-3805-291-23-1
TROUBLESHOOTING SYMPTOM INDEX - CONTINUED
0007 00
Table 4. Event Codes - Continued.
TROUBLE-
SHOOTING
EVENT
FAULT
PROCEDURE
CODE
DESCRIPTION
FAULT CONDITIONS/EFFECTS
PAGE
E362
Engine Overspeed
This code is generated when the ECM detects an overspeed condition.
When this code is generated, the event code will be logged. The
engine can experience the following performance effects:
E362-1 (Warning) has no effect on performance.
E362-2 (Derate) the engine power is derated. Contact your local
Caterpillar Dealer to clear this event code.
E363
High Fuel Temperature
This code is generated when the temperature of the fuel has exceeded
the trip point. When this code is generated, the event code is logged.
E363-1 (Warning) has no effect on performance.
E363-2 (Derate) the engine power is derated. Contact your local
Caterpillar Dealer to clear this event code.
E390
Fuel Filter Restriction
This code is generated when the ECM detects an abnormal fuel filter
differential pressure. When this code is generated, the event code will
be logged. The engine can experience the following performance
effects:
E390-1 (Warning) has no effect on performance.
E390-2 (Derate) The ECM will derate power.
E441
Idle Elevated to Increase
This code is generated when engine has been running for at least three
Battery Voltage
seconds and fuel temperature is above trip point for machine
application. When this code is generated, warning lamp will flash
while "Derate" is active. ET will display "Engine Derate" in first
engine status box on any ET status screen. ECM will generate an EID
E054 event code on data link. Event code will be displayed on a ET
diagnostic screen.
E539
High Intake Manifold
This code is generated when ECM detects a problem with the engine's
Air Temperature
intake manifold air temperature. When this code is generated, the
event code will be logged. The engine can experience the following
performance effects:
E539-1 (Warning) has no effect on performance.
E539-2 (Derate) the engine power will be derated. Contact your local
Caterpillar dealer to clear this event code.
END OF WORK PACKAGE
0007 00-50
