TM 5-3805-291-23-1
TROUBLESHOOTING SYMPTOM INDEX - CONTINUED
0007 00
TROUBLESHOOTING WITH AN EVENT CODE
Table 4. Event Codes.
TROUBLE-
SHOOTING
EVENT
FAULT
PROCEDURE
CODE
DESCRIPTION
FAULT CONDITIONS/EFFECTS
PAGE
E096
High Fuel Pressure
This code is generated when the fuel pressure is above the trip point.
The ECM will log the code. This code has no effect on performance.
E172
High Air Filter
This code is generated when the ECM detects excessive pressure drop
Restriction
across the air cleaner element. When this code is generated, the event
code is logged.
E172-1 (Warning) has no effect on performance.
E172-2 (Derate) the engine power is derated.
E194
High Exhaust
This code is generated when the engine has been running for at least
Temperature
three minutes and the calculated exhaust temperature has exceeded
the trip point for ten seconds. The ECM calculates the exhaust
temperature according to the values of the following operating
parameters:
Engine speed.
Atmospheric pressure.
Intake manifold air temperature.
When this code is generated, the event code is logged. E194-2 (Derate)
the engine power will be derated.
E265
User Defined Shutdown
This code is generated when the user defined shutdown switch has
been activated. Certain conditions must be met on some applications
prior to the activation of the user defined shutdown switch. These
conditions may include setting the parking brake and/ or placing the
transmission in neutral. When this code is generated, the ECM will
log the event and the engine will shutdown.
E360
Low Engine Oil
This code is generated when the ECM detects a problem with the
Pressure
engine oil pressure. When this code is generated, the event code will
be logged.
E360-1 (Warning) has no effect on performance.
E360-3 (Shutdown) the engine will shut down. Contact your local
Caterpillar Dealer to clear this event code.
E361
High Engine Coolant
This code is generated when the ECM detects a problem with the
Temperature
engine's cooling system. When this code is generated, the event code
is logged. E361-1 (Warning) has no effect on performance.
E361-2 (Derate) the engine power is derated.
E361-3 (Shutdown) the engine is shut down. Contact your local
Caterpillar dealer to clear this event code.
0007 00-49