TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0562 14
427-C1624
1. Check powertrain ECM and Messenger for
proper software versions.
Connect MSD (WP 0005 00) and verify
1. If software versions are compatible, go
software versions are compatible.
to Test 2.
2. If proper software is not installed, flash
proper software to appropriate ECM.
Cycle engine start switch to initialize
new software. Ensure diagnostic code is
no longer active.
2. Recheck for diagnostic codes.
1. If diagnostic code indicator and
diagnostic code are inactive, clear
diagnostic code.
2. If diagnostic code is active, ensure
proper software is installed before
replacing ECM. If software is correct,
replace powertrain ECM (WP 0063 00).
If powertrain ECM was just replaced,
install new Messenger (WP 0056 00).