TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1. If CID 2129 FMI 05 is active, exit this
(e) Determine if CID 2129 FMI 05 is
2129 05 - Continued.
active.
procedure and repeat this procedure. If
cause of diagnostic code is not found,
replace powertrain ECM (WP 0063 00).
2. If CID 2129 FMI 05 is not active,
problem does not exist at this time.
Resume normal machine operation.
2129 06
427-C1641
N OT E
The following test procedure may create other diagnostic codes. Ignore
these created diagnostic codes and clear these diagnostic codes when
original diagnostic code is corrected. Ensure diagnostic code CID 2129
FMI 06 is active before performing this procedure.
1. Check solenoid.
(a) Turn battery disconnect and engine
start switches to ON position. Do not
start engine (TM 5-3805-291-10).
(b) Disconnect ride control solenoid valve
#1 from wiring harness (WP 0218 00).
(c) At wiring harness connector for
solenoid, place a jumper wire from
contact 2 to contact 1.
