TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 4. Implement Control - Continued.
(MID 082)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
(a) Ensure powertrain ECM is
0296 09 - Continued.
operational.
1. If machine will start, go to Test 5.
(b) Start machine (TM 5-3805-291-
10).
2. If machine will not start, powertrain
ECM is not operating properly. Check
for these conditions with engine start
switch in ON position (TM 5-3805-291-
10):
(a) Messenger illuminates.
(b) Tachometer performs a self test, but
gear indicator does not illuminate.
(c) CID 0296 FMI 09 is active.
3. If any preceding conditions are present,
powertrain ECM may have failed. Also,
powertrain software may have been
erased due to resetting system too many
times. Troubleshoot powertrain ECM.
5. Check powertrain ECM for diagnostic
1. If related diagnostic codes are present,
codes.
troubleshoot diagnostic codes.
2. If no related diagnostic codes are active,
replace implement ECM (WP 0060 00).
6. Verify powertrain ECM and implement
1. If versions of software are compatible, go
ECM software versions are compatible.
to Test 7.
2. If proper software is not installed, flash
proper software to appropriate ECM
(WP 0056 00, WP 0057 00, WP 0060 00,
and WP 0063 00).
7. Recheck for diagnostic codes. Ensure
1. If diagnostic code indicator and
CID 0296 FMI 09 is active.
diagnostic code are inactive, clear
diagnostic code.
2. If diagnostic code is active, ensure proper
software is installed before replacing
implement ECM. If software is correct,
replace implement ECM (WP 0060 00).
If implement ECM was just replaced,
install new powertrain ECM (WP 0063
00).
0009 00-171
