TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 4. Implement Control - Continued.
(MID 082)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Check for additional diagnostic codes for
0296 02 - Continued.
other implement ECMs.
(a) Reconnect all ECMs.
(b) Turn battery disconnect and engine
start switches to ON position (TM
5-3805-291-10).
(c) After each of implement ECM has
1. If diagnostic codes are not present for
been reconnected, check for
other implement ECMs, exit this
diagnostic codes logged against
procedure. Repeat this procedure. If
implement ECM.
failure is not found, replace implement
ECM (WP 0063 00).
2. If diagnostic codes are present for other
implement ECMs, implement ECM may
have failed. Repeat this procedure. If
failure is not found, replace implement
ECM (WP 0060 00).
427-C1651
1. Inspect wiring harness connections.
0296 09
(a) Disconnect and inspect
connections for wiring harnesses
that are related to CAT Data Link
(b) Make sure connectors are clean and
tightly connected.
(c) If necessary, replace wiring
harness.
