TM 5-3805-291-23-1
ELECTRICAL GENERAL MAINTENANCE INSTRUCTIONS - CONTINUED
0022 00
ELECTRICAL CONNECTORS INSPECTION (ENGINE) - CONTINUED
1.
Check Connectors for Moisture and Corrosion.
a.
Inspect all wiring harnesses. Ensure routing of wiring harness allows wires to enter face of each connector at a per-
pendicular angle. Otherwise, wire will deform seal bore. This will create a path for entrance of moisture. Verify
seals for wires are sealing correctly.
427-C2043
b.
Ensure sealing plugs are in place. If any plugs are missing, replace plug(s). Ensure plugs are inserted correctly into
connector.
427-C2044
0022 00-11
