4
TM 5-3805-291-23-1
SECONDARY FUEL FILTER AND BASE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Fuel Switch and Sensors Removal, Cleaning and Inspection, Fuel Switch and Sensors Installation, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Unit
Rag, wiping (Item 35, WP 0233 00)
Tag, marker (Item 43, WP 0233 00)
Tools and Special Tools
O-ring (18)
Tool kit, general mechanic's, automotive (Item 90,
Personnel Required
Shop equipment, automotive maintenance and
MOS 62B, Construction Equipment Repairer
repair: organizational maintenance, common no.
1 (Item 70, WP 0232 00)
Equipment Conditions
Materials/Parts
Hood opened (TM 5-3805-291-10)
Cap set, protective (Item 6, WP 0233 00)
Right side cover removed (WP 0135 00)
Cleaning compound, solvent, type III (Item 7, WP
Drawings Required
TM 5-3805-291-23P, Figures 26, 35, and 61
Diesel fuel, DF-1 (Item 10, WP 0233 00)
Estimated Time to Complete Task
Fuel oil, diesel, DF-2 (Item 11, WP 0233 00)
2.0 hr
Fuel, turbine, aviation (Item 12, WP 0233 00)
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames, or
sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses and wires prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.